Your whole pool, one app
Manage pumps, sanitiser, heater, solar heating, lights, water features and valve actuators from one app over WIFI.
Pool automation
Pooltek
Modular, app-controlled automation that grows with your pool.
- 51 years, since 1974
- Backed by Waterco (ASX-listed)
- 30 dealer locations nationwide
- Tested to Australian Standards
Overview
Why choose the Pooltek
Pooltek by Waterco manages your whole pool and spa from one app over your home WIFI — single and multi-speed pumps, sanitiser, heater, solar heating, lights, water features and valve actuators. It's modular and expandable: start with what you need and add plug-in modules as you go, which makes it easy to retrofit to an existing pool. An optional module adds ORP and pH monitoring and dosing to keep your water balanced automatically.
Pump speed control
Controls single and multi-speed pumps, so filtration runs efficiently at the right speed.
Modular & expandable
A plug-in design lets you start with what you need and add modules later — easy to retrofit as you grow.
Optional ORP & pH dosing
An optional module monitors and doses ORP and pH to keep your water balanced automatically.
Multiple users
More than one person can connect to the app, so the whole household can help run the pool.
Up to 4 filtration times
Schedule up to four filtration periods a day, with up to 8 power outlets using two expansion modules.
What it does
What pool automation controls
Pool automation puts your whole pool in one place — so everything runs on a schedule, stays balanced, and is a tap away whether you’re home or not.
Your equipment
Run your pump, filter, heater, cleaner, lights and water features, and switch between pool and spa — all from one controller.
Sanitiser & balance
Optional chlorination and pH/ORP control keep the water balanced automatically, with less hands-on dosing.
Schedules & timers
Set filtration and heating to run at the best times — often cheaper off-peak power — and forget about it.
From your phone
Check and change everything from the app over WIFI, whether you’re at home or away.
Grows with you
Start small, expand later
Pooltek’s modular design means you only pay for what you need now, and add to it as your pool changes.
Start with the basics
Core control
Begin with pump speed control, heater, sanitiser and lights — the essentials on one app, over your home WIFI.
Add plug-in modules
Expand anytime
Plug in expansion modules for more outlets (up to 8 with two modules), valve actuators, and optional ORP & pH dosing.
What's in the system
Key components
- 01
Pooltek controller
The core unit that runs your pool and spa equipment and connects to your home WIFI.
- 02
Plug-in modules
Expansion modules add power outlets (up to 8 with two modules), valve actuators and more as you need them.
- 03
ORP & pH module
An optional module monitors and doses ORP and pH to keep your water balanced automatically.
- 04
Pump speed control
Controls single and multi-speed pumps so filtration runs at the right, efficient speed.
- 05
App & WIFI
The app runs everything over WIFI and supports multiple users across the household.
Tailored to your pool
Installation, step by step
1
Equipment assessment
Your Zane dealer reviews your pump, heater, sanitiser, lights and features to confirm what the system will control.
2
Install & connect
A licensed electrician installs and wires the controller to your equipment — retrofits to most existing pools.
3
Configure & connect the app
Modes, schedules and timers are set up and the app is connected to your home WIFI, then shown to you.
Specifications
At a glance
App (WIFI)Control
Modular & expandableDesign
2 standard, +3 per moduleOutlets
Yes — plug-in modulesRetrofit
Optional ORP & pHDosing
Keeping it running well
Low maintenance, long life
Keep the app updated
Keep the app and controller firmware up to date so you have the latest features and fixes.
Check sensors
Have temperature and (if fitted) pH/ORP sensors checked periodically so readings stay accurate.
Annual check
Fold the controller into your pool’s annual service so everything keeps talking to everything else.
The range
More pool automation
Aquamaster
Run your whole pool from a touch screen — or your phone.
View Aquamaster →
Questions, answered
Before you decide
Can I add to Pooltek later?
Yes — that’s the point of its modular design. Start with what you need and plug in expansion modules (more outlets, valve actuators, ORP & pH dosing) as you go.
Does it control my sanitiser and pH?
It controls your sanitiser, and an optional module monitors and doses ORP and pH to keep the water balanced automatically.
Can more than one person use the app?
Yes — multiple users can connect to the Pooltek app, so the whole household can help run the pool.
Free, no-obligation quote
Get a quote for the Pooltek
Tell your local Zane dealer about your pool and they'll price it up — no obligation, no pressure.
Swim months longer. Not just summer.
Talk to a Zane specialist today, or get a free quote from your local dealer.